Simple Ceiling Decoration Setup Tutorial

Here is a short 6-steps-tutorial that will help you to put up the deco indoors.

Step 1

Drill 8 holes – 8mm/0.3″ diameter – in the walls close to the ceiling.
We recommend a distance of 10-15cm or 4″-6″.
4 holes should be closer to the corners of your room and 4 in the middle of each wall.

Simple Ceiling Decoration Setup Tutorial - Step 1

Step 2

Put the dowels inside the holes you’ve just drilled. Below is a picture of dowels with hooked screws that you can buy at a local hardware store.

Hooked Screws and Dowels for putting up a decoration
Simple Ceiling Decoration Setup Tutorial - Step 2

Step 3

Screw the hooks into the dowels.

Simple Ceiling Decoration Setup Tutorial - Step 3

Step 4

Tie a rope to the hooks across the perimeter of the room.

Simple Ceiling Decoration Setup Tutorial - Step 4

Step 5

Start with the central round carabiner and bead the ends “A” of the petals if you are setting up 12-petals canopy or the ends “B” if you are setting up 6-petals canopy.
Connect the opposing rubber loops of the petals with carabiners. One carabiner per 2 loops is enough but if you want to have more space between petals you can attach one carabiner to every rubber loop and then connect the corresponding carabiners. Keep all petals laying on the white back side when connecting.

Simple Ceiling Decoration Setup Tutorial - Step 5

Step 6

Tie the ends of the canopy you’ve assembled and adjust its position.

Simple Ceiling Decoration Setup Tutorial - Step 6

Psychedelic Ceiling Decoration "Spirit Monkey" - UV-Reactive Stretchable Lycra Decor